Home › Remote Hardware Lab

Remote hardware · real STM32 · real CAN

STM32 Remote Automotive Engineering Lab

Write ECU firmware in your browser and run it on physical STM32 NUCLEO-G474RE hardware in the CAEE lab — over a real 500 kbit/s CAN bus, with automated scenarios, measurements and scoring.

Now accepting access requests for the first hardware cohort.

About the Remote Hardware Lab

The CAEE Remote Hardware Lab lets you run your own firmware on real automotive hardware from your browser. You write C in the online workspace; it is safety-checked and compiled in the cloud, then flashed to a physical STM32 NUCLEO-G474RE in the CAEE lab.

Your board sits on a real 500 kbit/s CAN bus with a protected Vehicle Simulator ECU that plays the rest of the car. Every run is measured from the real bus traffic and scored automatically, across 13 automotive ECU projects.

Free Remote Hardware Lab Workshop

Build a Shift-Light ECU on a real CAN bus

What this lab adds to your career

Automotive firmware roles ask for hands-on CAN, embedded C on a real microcontroller and debugging against a running network. In this lab you do exactly that — on physical STM32 hardware, graded from the real bus traffic.

Roles it prepares you for: embedded / firmware engineer (automotive), ECU application software engineer, vehicle network (CAN) & diagnostics engineer, ECU validation & test engineer.

  1. CAN TX/RX Bring-Up — Receive and decode a periodic CAN signal; timeout supervision
  2. CAN Filtering — Software acceptance filters, ID/mask matching, frame length checks
  3. Signal Encoding & Decoding — DBC-style signals: Intel/Motorola byte order, sign, factor, offset
  4. Engine ECU — Plausibility checks, derating, rate limits, on-time 100 ms frames
  5. Body Control Module — Time-driven state machines: locks, indicators, wiper, lamps
  6. Instrument Cluster ECU — Display filtering, substitute values and warnings on lost sources
  7. Brake / ABS ECU — Wheel slip, lock detection, time qualification and hysteresis
  8. Battery ECU — Multiplexed frames, coulomb counting, debounced protection flags
  9. Heartbeat & Timeout Supervision — Per-node network supervision state machines
  10. Alive Counter & Data Integrity — End-to-end protection: CRC-8 (SAE J1850) and alive counters
  11. CAN Fault Management — Fault debouncing, DTC-style records, degraded mode and recovery
  12. Automotive Gateway ECU — ID-domain routing, ID translation, re-packing and rate limits
  13. Diagnostics Capstone — UDS (ISO 14229) subset over ISO-TP (ISO 15765-2), DTCs, P2 timing

Included: Remote Hardware Lab worth ₹16,800 — 45 days of access to 13 automotive ECU projects on real STM32 boards and a real CAN bus.

Included: Remote Hardware Lab worth ₹16,800 — 45 days of access to 13 automotive ECU projects on real STM32 boards and a real CAN bus.

Code. Check. Run. Measure. Prove.

  1. Write — Edit the project's C files in the browser workspace.
  2. Check & build — Safety checks and an isolated cloud build — errors come back with line numbers.
  3. Queue — A fair queue hands your validated build to the next free hardware station.
  4. Run on hardware — Flashed to the student NUCLEO-G474RE; a protected Vehicle Simulator ECU drives the 500 kbit/s CAN bus.
  5. Score & diagnose — Measured CAN traffic is scored automatically, with clear diagnostics.

One real vehicle network, many ECU roles

The lab station pairs your Student ECU with a protected Vehicle Simulator ECU — both STM32 NUCLEO-G474RE boards — on one physical 500 kbit/s CAN bus. The simulator plays the rest of the car: engine, brakes, BCM, battery and gateway traffic. Your firmware is flashed only to the student board; the simulator never accepts student code.

13 Automotive ECU Engineering Projects

  1. CAN TX/RX Bring-Up – Engine RPM — Receive the Engine RPM frame (ID 0x100, 500 kbit/s), decode it, count RX frames and detect a 500 ms communication loss.
  2. CAN Filtering — Implement acceptance filters and message routing rules.
  3. Signal Encoding & Decoding — Pack and unpack production-style vehicle signals.
  4. Engine ECU — Develop RPM, temperature, throttle and status messaging.
  5. Body Control Module — Implement door, lighting, indicator and wiper logic.
  6. Instrument Cluster ECU — Decode multi-ECU data and render vehicle state.
  7. Brake / ABS ECU — Process wheel-speed inputs and detect lock conditions.
  8. Battery ECU — Monitor voltage, current, temperature and SOC conditions.
  9. Heartbeat & Timeout Supervision — Detect missing ECUs and communication loss.
  10. Alive Counter & Data Integrity — Validate counters, sequence and payload health.
  11. CAN Fault Management — Handle invalid signals, timeouts and recovery states.
  12. Automotive Gateway ECU — Route selected frames between ID domains on the single CAN bus.
  13. Diagnostics & Vehicle Network Capstone — Integrate diagnostics and complete virtual vehicle behaviour.

Lab access fee

₹16,800₹8,999 / 75 days

Get access to the lab

Already in a CAEE CAN / CAN-FD or FOC Motor Control Internship? Sign in with your existing account — your access is added to it, no new account needed. Everyone else: send a request and we'll set you up with a time-bound lab account.

  1. Request or enrolment — through the request form on this page, or your CAEE programme
  2. Approval — CAEE reviews and sets your access period
  3. One-time password — activate your account and set your own password
  4. Time-bound access — runs for your approved number of days