Paid industry internship programme

Build real automotive firmware. Not slideware.

Where engineers build real automotive-grade firmware — not slideware.

Choose your track

CAN / CAN-FD

CAN / CAN-FD Internship

Automotive Communication & Safety

A CAN/CAN-FD communication and safety internship on the STM32 NUCLEO-G474RE. You'll build a deterministic embedded-C kernel, wire and diagnose a real two-node CAN-FD physical layer, work through frame arbitration and fault confinement, calculate valid FDCAN bit timing, design a protected signal-encoding scheme, and implement a receiver-side safe-state machine that rejects invalid traffic.

₹48,000₹35,000 / 4-6 months

11 modules · 4 projects · NUCLEO-G474RE + MCP2562FD

Included: Remote Hardware Lab worth ₹16,800 — 45 days of access to 13 automotive ECU projects on real STM32 boards and a real CAN bus.

View syllabus

FOC Motor Control

FOC Motor Control Internship

Sensored PMSM Field-Oriented Control

A sensored motor-control internship on the STM32 NUCLEO-G474RE with the X-NUCLEO-IHM08M1 driver. You'll implement the full FOC stack — current sensing and ADC calibration, Clarke/Park transforms, discrete PI current control with anti-windup, SVPWM, and nested speed control — then close the loop on a digital twin with quantitative protection and verification experiments.

₹62,000₹45,000 / 4-6 months

8 modules · 4 projects · NUCLEO-G474RE + X-NUCLEO-IHM08M1

Included: Remote Hardware Lab worth ₹16,800 — 45 days of access to 13 automotive ECU projects on real STM32 boards and a real CAN bus.

View syllabus

Remote Automotive Engineering Lab

Your code, running on real STM32 NUCLEO-G474RE boards in the CAEE lab, on a real 500 kbit/s CAN bus, straight from your browser. No board to buy.

Explore the Remote Lab

Free workshops

New to embedded? Start here. Pick your track, register, and get a free certificate on passing the assessment — then step into the full paid internship.

See the free workshops

What we are

CAEE (Centre for Automotive Embedded Engineering) is a hands-on training centre in HSR Layout, Bengaluru, focused on automotive embedded systems. Interns write firmware for the STM32 NUCLEO-G474RE: CAN/CAN-FD communication and safety in the CAN / CAN-FD Internship, and sensored field-oriented motor control (FOC) in the FOC Motor Control Internship. Code is checked automatically, CAN projects run on a real 500 kbit/s bus in our Remote Hardware Lab, and engineers review the projects — so what you build is what employers ask for.

Steps to join

  1. Register — Create your account and choose your track.
  2. Submit details & resume — Share your resume and academic marks.
  3. Screening test — Attend a short screening to confirm fit.
  4. Payment — Confirm your seat via secure payment.
  5. Training & internship — Build 6 modules and 4 projects with mentor feedback.
  6. Certification — Pass everything and download your verifiable certificate.

The certificate you'll earn

Every CAEE certificate carries a unique ID that employers can verify on this site, and it's backed by work they can inspect — your submitted code, projects and lab record. Add it to LinkedIn the day you finish.

Verify a certificate

Talk to our mentor

Purushotham — CFO Anadiwave semiconductor, CAEE

Common questions

Do I need to own the hardware?

No. You write the code in your browser. Code exercises are checked automatically online, and the CAN projects run on real STM32 hardware in the CAEE Remote Hardware Lab — there is no board to buy.

Is the internship remote?

Yes — it's a code-first remote internship with mentor feedback on each module.

I'm from CSE/EEE, not ECE. Can I join?

Yes. Foundations start from C fundamentals.

Will I get a certificate?

Yes — a verifiable CAEE certificate on completing all the modules and projects of your track. Anyone can check its ID at caee.co.in/verify.

See all questions and programme facts